opsc

Cooling Tower

Cross Flow Type SDC-U

SDC-U Model CROSS FLOW SQUARE TYPE U SERIES

 01

Specifications Data

Features

  • Space Saving, Compactness and Lightweight
  • New development such as high-efficiency fill type eliminator combined and cone-shaped fan casing are incorporated. combination of low noise fan type AVS reduction in installation space and volume as well as dry & wet weight by 20% in average compared with our old models.
  • Built-in Piping Arrangements
  • "U" series cooling towers are supplied with built-in piping arrangement as standard. The result is cost-and-space saving in the installation worke.
  • Easier Maintenance
  • A new speed reducer SRS wedge belt is compact and easy for maintenance. Also FRP lower water basin is sloped for easy cleaning. sprinkler piping.
  • Reduced installation time
  • "U" series cooling towers cover the ranges from 50RT to 1000RT. Delivery can be made in complete assembled or semi assembled unit form. The installation time at site can be greatly reduced by this medthod.

 

 

 

Cross Flow Type SNC-U

SNC-U Model CROSS FLOW SQUARE TYPE U SERIES

  01

Specifications Data

Features

  • Energy Saving, Space Saving Compactness and Lightweight
  • SNC-U Model is designed to install in a small space. Compare with other model, SNC model is the best one for space limited installation. New development such as high efficeiency fill type eliminator combined and cone shaped fan casing are incorporated. Combination of super low noise fan type AVS reduction in installation space and volume as well as dry & wet weight by 20% in average compared with our old models.
  • Built-in Piping Arrangements
  • "U" Series cooling towers are supplied with built-in piping Arrangements as standard. The result is cost and space saving in the installation work
  • Easier Maintenance
  • A new speed reducer SRS with wedge belt is compact and easy for maintenance. Also FRP lower basin is sloped for easy cleaning.
  • Reduced Installation Time
  • Delivery can be made in semi-assembled unit format site on request. The installation time at site can be greatly reduced by this method

 

 

Cross Flow Type SCC

SCC-U Model COOLING TOWER FOR AREA AIR CONDITIONING

 

 
01

Specifications Data

Features

  • Natural resource conservation energy savings, these are the problems both enterprised and men must contemplate together. SHINWA in the course of producing cooling tower. have always grappled with this problem. Effective use of water resource by recycling large quantity of water for reusage thus cutting down the water cost is one of them. Power consumption savings, space savings, minimal maintenances are some of the goal pursued by us in the design of industrial cooling tower. Based on broad experiences, from installation to after services, SHINWA is ready to serve the needs of customers.

 

 

 Cross Flow Type SBC

SBC Model COOLING TOWER BOTTLE TYPE

  Super Low Noise

 01

Specifications Data

Features

  • With our own technology, we have achieved energy conservation and noise reduction (ES-ESS-Model)
  • Fan blade contour, angle, air flow quantity, all these factors were taken into consideration in pursuit of and to achieve the losers possible noise.
    At the same time, we have developed powerful motor of low output as well as low noise and succeeded in superbly low noise and economical performance. Low noise fan is used on ES models as well.
    With its rationally designed fan blade contour, it generates big air flow quantity with low noise, without carrying over.
    Fan motor operated with lower output than the conventional one and is very economical.
  • Free from rust, FRP finishing brings about-uniform quality.
  • Casing and water Basin are made of rigid FRP (Fiber glass Reinforced Polyester), eliminating corrosion which is the biggest enemy of cooling tower. It is lightweight and superbly durable.

      Modeled with Shinwa’s originality, it is uniform quality because of hot press processing and is very reliable.

  • Highly efficient fills for heat exchange.
  • The PVC (Polyester Vinyl Chloride) fill Shinwa developed for counterflow cooling tower is flame resistant and has very high heat exchange performance. The specially combined material makes it durable and withstands chemical reaction.
  • Shinwa’s unique sprinkler system (with eliminator to prevent carry-over), ensures maximum performance capability of fills.
  • Sprinkler which automatically rotates at low water pressure gives least carry-over and uniform distribution of circulating water to the fills
    It ensures maximum performance capability.
  • Completely eliminates water dripping noise and water splash. (ES-ESS-Model)
  • The special noise-absorption mat absorbs the noise of water dripping into the water basin, while also preventing water splash out to cooling tower.
  • Complete anti-corrosion treatment eliminates rust and corrosion from major problem.
  • The steel components of framework are hot dipped galvanized treated to minimize the possibility of rust and corrosion. Rust or corrosion is no longer a matter of primary concern.
  • New type of louver which will not rust
  • The new vertical louvers up from SBC-3 to 80 are so contoured to prevent water splash out from the tower. For the larger size towers, the base steel is initially chemically cleansed and is given thick polyethylene coating serving dual purpose of stabilized air inlet while preventing water splash. Its durability, anti-corrosion and easy attachment or removal make the water basin cleaning task an easy one.
  • Centralized piping makes installation work on site easy.
  • The inner piping, the pipe connecting sections are all centralized at water basin, making it an easy and efficient task which leads to cutting down the cost of installation.

 

 

 

Cross Flow Type MXC

SNC-U Model CROSS FLOW SQUARE TYPE U SERIES

Energy saving, Space saving, Compact design, High efficiency and performance


 01

 

Specifications Data

Features

  • Improved maintenance Energy Saving, Space Saving Compactness and Lightweight
  • By the optimum arrangement of new design copper coil and high-performance infill, improved performance of maintenance and cleaning for the heat exchanger coil and infill. and also, by adopting special flange type for connecting of heat exchange coil and header to connect certainly, improved performance on installation and detachment of heat exchanger coil.
  • Improved cooling performance by adopting new high-efficiency fan (for super low noise)
  • Improved fan performance and noise level by optimum design based on air flow of three dimensional opposite solution method (TURBO design) then realized max. 150 ton per 1 cell.
  • Unnecessary sprinkler piping work at site by design of internal piping type for all of models
  • By changing design of sprinkler system to internal piping style, appearance to be simply and site assembly work can be safety. Applying re-cycle PVC for sprinkler piping.
  • Special inclined Heat Exchanger
  • In order to improve drainage, adopting special 3D inclined spiral pipe type heat exchanger for all models
  • Tremendous Durability
  • he coil used for heat exchanger is made of seamless tube and of deoxidized copper, superb against corrosion. Main components of tower parts are hot dip galvanized in steel parts, while for other parts, FRP as well as PVC materials are used to assure long life and durability. Also sprinkler pump are all of outdoor totally enclosed type, while the impeller is made of bronze copper to be superb against corrosion
  • Saving on Running and Operating Cost
  • Be applying fan casing in bell mouth equipped with a high efficient low noise fan, especially designed for cooling tower, and combined with a new developed highly performance heat exchanger, it enables the fan motor to be of low power, thus saving energy and as a result, in effectively the running cost.
  • Materializing Low Noise Operation
  • The MXC-UW series in low noise and super low noise models are available in variety of types at your choice to match and or to suit the surroundings and or environments. Also various noise data in details are made available for a proper and smooth pre-evaluation of noise levels and accordingly, in taking effective countermeasures related to the installation of towers in problem areas.

      Heat exchanger is made of high corrosion resistance copper coil to be maintenance  freeMCC SERIES

  • The new developed technology, closed circuit counter flow type which has not been yet used is applied to our cooling tower. By using this system, not only heat exchanger efficiency but it can also realize such as both more energy saving and easier maintenance at the same time.